Some electrical problems announce themselves clearly: a breaker that trips the moment you reset it, an outlet that stopped working overnight, a panel that hums when you stand next to it. Those need attention soon, and we schedule them accordingly. Others are less urgent but still worth fixing before they become something bigger. We take both kinds of calls, and we scope the job on the phone so you know what you are dealing with before anyone comes out.
Genesee is a small mountain town, and the homes here reflect that. Older construction, additions that were put on over the years, outbuildings with wiring that may or may not have been documented, and panels that were sized for loads that bear no resemblance to what the house actually draws now. We handle all of it.
Call (720) 713-7632 and we will talk through what you are seeing.
Certain electrical work requires a permit before it starts, and in Jefferson County that typically covers panel replacements, service upgrades, new circuits, and wiring that runs through finished walls. The permit process exists so the work gets inspected and signed off, which protects the homeowner and the property. It is not a reason to delay the job. It is part of how the job gets done correctly.
We handle the permit side. That means we know what needs to be filed, when to file it, and how the inspection timing fits into the overall schedule. For a homeowner in Genesee, the practical effect is that you do not have to figure out which forms go to which office. You call, we scope the work, and we handle what the jurisdiction requires.
The one thing permits do affect is timing. An inspection has to happen before certain parts of the work are closed up, and scheduling around that takes some coordination. We factor it in when we confirm the job.
Intermittent electrical problems are their own category of job. A breaker that trips twice a month but not on any predictable schedule. A circuit that loses power only when it rains. An outlet that works fine until something larger comes on elsewhere in the house. These are not straightforward repairs, because the fault is not sitting there waiting to be found.
Tracking down an intermittent fault means working through the circuit systematically: testing connections, checking for loose terminations, looking at how the load behaves under different conditions, and sometimes waiting for the fault to show itself. Older homes in this area have had decades of additions, modifications, and repairs, and occasionally the wiring history is not easy to reconstruct from what is visible.
A connection that is loose but not broken will pass current most of the time. Under load, or when temperature changes cause the wiring to expand and contract, it fails. By the time someone goes to look at it, it is working again. The same pattern applies to arc faults, where the arc-fault breaker trips correctly but the underlying cause is somewhere along a circuit that has been extended or modified at some point.
AFCI and GFCI breakers are not nuisance devices. When one trips, it is responding to a condition the breaker detected. Resetting it repeatedly without finding the cause leaves the underlying problem in place. We trace the circuit, identify what triggered the trip, and address the actual fault rather than just restoring power.
The honest answer is that the price depends on what the job actually turns out to be. What looks like a straightforward outlet replacement can sit on a circuit with a loose connection several feet away, or on a panel that is already at capacity. What looks like a simple panel swap can involve a service-entrance upgrade once the load calculation is done. Those things change the scope, and the scope is what drives the price.
When you call, we go through the work with you and confirm the rate before anything is scheduled. The price covers what the job involves. If something comes up during the work that changes the scope, we explain it and confirm the new figure before proceeding.
Calling to ask what something costs is a reasonable thing to do, and you will get a straight answer. No-pressure estimates, priced up front, so the decision is yours to make without any pressure on the call. The options are set out on our page of electrical services.
A generator that is not properly connected to the panel is not much use when the power goes out. The transfer switch is what makes the installation work safely. It isolates the generator from the utility line so the home draws from the generator without back-feeding the grid. We install the transfer switch, run the wiring from the panel to the connection point, and size the hookup for the circuits it needs to carry. In a mountain town where multi-day outages are a real possibility during winter storms, a properly wired generator is worth doing right.
When a panel is no longer adequate for the loads the home is running, the symptoms show up as nuisance trips, warm breakers, or circuits that will not hold under normal use. A full panel replacement addresses the capacity and the condition of the equipment at once. Breaker replacements handle individual failures without touching the rest of the panel. Both involve confirming the service size is right for the home before any work starts.
These appliances draw more current than a standard circuit is built for, and they need their own dedicated feed from the panel. A 240-volt circuit sized for the specific appliance, wired to code, and protected correctly at the panel is what makes the installation safe. If the panel does not have capacity for an additional circuit, that gets addressed as part of the same scope.
Running power to a structure that is separate from the main house involves its own set of considerations: the distance, whether the run goes underground or overhead, what the structure needs to power, and whether a subpanel makes more sense than a single circuit. Electric gates add a control circuit on top of the power supply. We scope the whole thing on the call and confirm what the job involves before scheduling.
A 100-amp service that was adequate when the home was built may not be keeping up with an electric heating load, an EV charger, and a modern kitchen running at the same time. A service upgrade to 200 amps involves replacing the panel, upgrading the service entrance, and coordinating with the utility for the new meter connection. It is one of the more involved jobs we handle, and the load calculation that precedes it is what makes sure the new service is sized correctly.
Outlet work covers a wider range than it sounds. GFCI outlets at wet locations, AFCI outlets in living areas, USB outlets in bedrooms and home offices, outdoor weatherproof outlets, and dimmer switches that require compatible fixtures are all distinct jobs with their own requirements. Replacing an outlet that stopped working is often quick. Adding a new outlet to a room that does not have one in the right place involves running a circuit, which is a different scope. We confirm which one applies when you call.
Not every power problem originates inside the home. A voltage fluctuation that causes lights to dim across the whole house, a loss of power to half the circuits with no tripped breaker, or a service that drops out intermittently can all point to the utility side of the meter rather than the wiring inside the walls.
We work through the diagnostics to determine where the fault is. If it is on our side of the meter, we fix it. If it is on the utility's side, we explain what we found and what the next step is, which typically means contacting the utility directly with a clear description of the fault. You do not leave the call without knowing what the problem is and who handles it from there.
Calls are answered here, and the work gets scheduled properly. That means the appointment is confirmed before the visit, the scope is settled on the call, and we know what we are coming out to do before we arrive.
Urgent faults do not always happen at a convenient time. A burning smell near a panel, an outlet that is sparking, or a circuit that has failed in a way that affects heating equipment are situations we take seriously. We take short-notice work and handle the call the same way regardless of when it comes in. We are available every day from 5:30 AM to 10:00 PM.
A rental that cannot sit empty, a business that cannot close for a day, a household with a schedule that does not leave much room for a multi-hour job. These are real constraints and we work around them. The scope is confirmed on the call, the timing is discussed before the visit is booked, and if the job needs to happen in stages to keep the property functional, that gets factored into the plan. The work is done properly and left tidy when we go.
We cover Genesee and the surrounding area throughout Jefferson County. That includes Idledale, Kittredge, Indian Hills, Golden, and Morrison. If you are in any of these communities and need electrical work handled, call and we will confirm the address is in the service area and get the job on the schedule.
The same approach applies everywhere we work: the scope is confirmed on the call, the price is set before the visit, and the work is done to the code inspectors in this county enforce.
A full panel means no open slots and no remaining capacity for additional breakers. The options are a panel replacement with a higher-capacity unit, a tandem breaker where the existing panel allows it, or a subpanel fed from the main panel to carry the new circuits. We explain the options and the cost of each before any work is scheduled.
Yes. Running power to a detached garage, a shed, or an outbuilding is a job we scope on the call. The distance from the main panel, whether the run goes underground or overhead, and what the structure needs to power all affect how the job is put together. We confirm the scope and the price before the visit is scheduled.
Yes. Both draw high starting currents and sustained loads that make a shared circuit unreliable and potentially unsafe. We install a dedicated circuit sized for the specific equipment, with the correct wire gauge and breaker rating for the load.
A load calculation tells you what the panel is currently carrying and whether there is capacity for what you want to add. We run through that as part of scoping any job that adds a significant load, including generator transfer switches and dedicated appliance circuits. If the panel cannot carry the addition, a service upgrade becomes part of the conversation before any other work is scheduled.
We coordinate access before the visit so the panel is reachable when we arrive. If the panel is in a shared area managed by a building owner or property manager, we ask you to arrange access in advance rather than arriving and waiting for someone to locate a key.
A safety inspection is the most useful starting point. It identifies anything that is likely to come up in a buyer's inspection, including GFCI and AFCI coverage, panel condition, grounding, and any wiring that does not meet current standards. Addressing those items before listing avoids last-minute negotiations over repair credits.
Homes in this area often have wiring that has been extended or modified over many years, and the documentation for those changes is not always easy to find. Knob-and-tube and aluminum branch-circuit wiring show up in older construction, and panels that were sized for smaller loads are common. Grounding and bonding issues, undersized circuits, and connections that have loosened over time with temperature cycling are all things we find regularly in this kind of housing stock.
In most cases, yes. Overhead runs are permitted under specific conditions, but buried cable is the standard approach for a permanent supply. The required burial depth depends on the conduit type and the wire used, and we confirm what applies to the specific installation before the work starts.
The job is not finished until it is tested, cleaned up, and you know exactly what was done.
Call (720) 713-7632 any day from 5:30 AM to 10:00 PM.
Talk through what you are seeing, get the scope confirmed, and find out what it costs before anything is scheduled.
Electrical service reaches these neighboring areas too: Evergreen, Sterling Ranch, Holly Hills, Roxborough Park, Loveland.
Have a look at our complete service area.
Below is a plain-language look at the electrical services we handle in Genesee and the surrounding area. Each row covers what the job involves, who it fits best, and a practical note to help you decide whether it is the right call. Read through, then call us to talk through the specifics and get a price before anything is scheduled.
| Service | What the Job Involves | Best For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrades, Panel replacement and load calculation, Subpanel installation, Service entrance and meter upgrades | Older Genesee homes adding EV chargers, electric heating loads, or major appliances that push past the original panel capacity | Panel work is permitted and inspected through Jefferson County. We handle the permit side so the job is ready for inspection when the work is done. |
| Lighting Installation | Recessed and LED fixture installation, Security and motion-sensor lighting, Outdoor and landscape lighting wiring, Indoor lighting layout and circuit work | New construction, remodels, or any home adding exterior security lighting or upgrading to LED fixtures | Outdoor fixtures need weatherproof-rated connections and the correct circuit protection. We confirm the rating before installation. |
| Electrical Safety Inspections | Panel condition and wiring type review, GFCI and AFCI coverage check, Grounding and bonding assessment, Written summary of findings | Home buyers, landlords turning over a rental unit, or any homeowner whose panel and wiring have not been reviewed in several years | An inspection before buying a home can surface wiring issues that are not visible during a standard home inspection. |
Call (720) 713-7632 any day from 5:30 AM to 10:00 PM to talk through the job, get the scope confirmed, and find out what it costs before anything is scheduled.
(720) 713-7632