A lot of homes in Loveland were built before the electrical demands of modern households were even imaginable. The wiring that served a house in the mid-twentieth century was sized for a handful of circuits, a few lights, and maybe a single large appliance. What those homes are being asked to carry now is a different matter entirely. Calling an electrician doesn't have to be stressful, and for homeowners dealing with older wiring, a straightforward conversation about what is in the walls is often the most useful place to start.
We handle electrical work across Loveland for property owners, rental operators, and small businesses. Repairs, panel upgrades, new circuits, wiring, outlets, lighting, generator hookups, and the kind of seasonal work that this part of northern Colorado calls for. We are available every day from 5:30 AM to 10:00 PM.
Call (720) 713-7632 to get the scope confirmed and find out what the job costs before anything is scheduled.
Wiring is easier to deal with when somebody explains it plainly, and older homes give you a specific set of things to understand. Knob-and-tube wiring was standard for decades, and it was designed for a world without dishwashers, computers, or electric vehicle chargers. Aluminum branch-circuit wiring came later and brought its own problems: aluminum connections loosen over time, and a loose aluminum connection under load generates heat at the joint. Neither type meets current code requirements, and both are common in housing stock that has not been updated.
The signs that something is wrong are not always dramatic. Lights that dim when the refrigerator starts, outlets that feel slightly warm, a breaker that trips on a circuit that seems lightly loaded. These are the wiring telling you it is working harder than it should. An electrical safety inspection covers the panel, the wiring throughout the home, grounding and bonding, and the arc-fault and ground-fault protection that current code requires at specific locations. The result is a clear picture of what the home has and what it needs. This is a local operation, and every customer matters.
Not every electrical job requires shutting off the whole house. An outlet replacement, a circuit breaker swap, or a new lighting fixture usually means isolating the one circuit involved and leaving everything else running. A panel replacement or a service upgrade is a different situation. That work requires taking down the main breaker, which means the whole property is without power for part of the day.
We plan around that before the visit starts. If you are working from home, we talk through which parts of the job can be staged so you keep power to a specific room or circuit for as long as possible. A business that has to stay open needs a different approach, and we work out what can be shut down, what has to stay live, and how the work gets sequenced around it. The scope and the plan are settled on the call, not improvised on the day.
Choosing the right electrical fix is easier than it sounds once the job is scoped properly. The price depends on what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry what is being added. A straightforward outlet replacement is a short job with a clear price. A wiring fault that requires tracing a circuit through finished walls is a longer one, and the quote reflects that.
What would change a quote mid-job is finding something unexpected once the wall is open or the panel cover is off. That does not happen silently. If the scope changes, the price is confirmed again before the additional work proceeds. No-pressure estimates, priced up front, is how we handle every call. You get the rate before anything is scheduled, and you decide whether to move forward without any pressure to do so on the call.
When you call, the job gets scoped on the phone. That means talking through the symptom, asking the right questions about the home and the panel, and giving you a price before a visit is booked. If the problem is urgent and will not keep, we look at what is available and find the earliest opening. A tenant in a rental unit or a business that cannot close for the day is a scheduling consideration, not an obstacle. We work out what the situation requires and confirm the plan before anyone shows up.
Appointments run from 5:30 AM to 10:00 PM every day, including weekends. If you are a landlord coordinating access for a tenant, or a property manager handling a repair across multiple units, the same process applies. Call, scope the job, confirm the price, and book the visit. One call is enough to get the visit booked. If you want the longer version, it is on the page covering our electrical services.
Before a small wiring issue turns into a hazard, it usually sits on a list somewhere. The outlet in the garage that has never worked. The switch in the hallway that sparks occasionally when you use it. The exterior light above the back door that nobody has gotten around to replacing. These are not emergencies, but they are not nothing either.
A switch that sparks is an arc-fault waiting to happen. An outlet that has never worked points to a wiring fault or a failed connection that may be affecting other outlets on the same circuit. An exterior light that is not working may have a wiring problem at the junction box rather than just a burned-out bulb. The jobs people put off tend to be the ones where the symptom seems minor. The underlying cause is not always. Troubleshooting and diagnostics on a single circuit is a short visit, and it tells you exactly what you are dealing with before the problem gets worse.
Exterior outlets, security lighting, motion sensor lights, and recessed or LED lighting installed under soffits or along a covered porch all require weatherproof wiring and boxes rated for outdoor use. We handle the circuit installation, the wiring, and the fixture mounting so the installation holds up through the freeze-thaw cycles this region puts it through.
A ceiling fan installation is not simply swapping a fixture. The ceiling box has to be rated for the fan's weight and movement. The wiring has to support the switch configuration. We handle new installations and replacements, and we address the box and the wiring before the fan goes up. Recessed lighting and LED fixture upgrades are also part of the regular work we do in homes across Loveland.
Commercial and light industrial premises have different requirements than a residential job. A restaurant, a retail space, or a small warehouse may not be able to take a circuit down during business hours. Out-of-hours scheduling lets the work happen without disrupting operations, and keeping part of a site live while another section is worked on is a planning conversation that happens before anything is scheduled.
The difference between a commercial job and a residential one is usually in how it is planned. The work itself follows the same code-compliant wiring standards. The logistics require more coordination, and that coordination starts on the call.
The combination of cold northern Colorado winters and older housing stock in a city this size produces a specific set of jobs that come up again and again. These are the ones worth understanding before you need them.
A generator is only useful if it is wired correctly. The transfer switch is what keeps the generator isolated from the utility line during an outage. Without it, power fed back into the line creates a hazard for utility workers restoring service. We install the transfer switch, run the wiring from the panel to the connection point, and size the hookup for the circuits it needs to carry. The generator itself is separate equipment. The electrical installation is what makes it safe and functional when the grid goes down.
A panel that was sized for a smaller load years ago is not built for what a home demands today. Electric heating circuits, EV chargers, and modern kitchen appliances push older 100-amp panels past their design capacity. A panel replacement involves a load calculation to confirm the right service size, replacing the existing equipment, and making sure the service entrance matches the new capacity. Individual breaker replacements are a shorter job, but a breaker that fails repeatedly is often a sign the circuit load needs to be addressed too.
An inspection covers the panel condition, the wiring type, grounding and bonding, and GFCI and AFCI protection at the locations code requires. The result is a written picture of what the home has and what it needs. Inspections are useful before a home sale, after a purchase, when a rental unit turns over, or when an older home has not had its wiring reviewed in years. The electrical work done to the code inspectors here enforce is what makes an inspection result mean something.
A surge protector installed at the panel level catches voltage spikes before they reach any circuit in the building. A single event from a utility fluctuation, a nearby lightning strike, or a grid disturbance can damage appliances and electronics across the whole home at once. Panel-level surge protection is a straightforward addition during a panel job or as a standalone installation, and it is worth asking about when the panel is already being opened.
We cover Loveland and the communities around it across Larimer County and the surrounding area. Windsor, Fort Collins, Timnath, Berthoud, and Johnstown are all part of the area we schedule work in. The same process applies wherever the job is located: call, scope the work, confirm the price, and book the visit. If you are not sure whether your address falls in the service area, call and ask.
The electrical side of a generator installation covers the transfer switch, the wiring from the panel to the generator connection point, and sizing the hookup for the circuits it needs to carry. The transfer switch keeps the generator isolated from the utility line during an outage, which is a safety requirement. The generator itself is separate equipment. We handle the electrical installation so the system is safe and ready when an outage hits.
If the service entrance needs to be upgraded to match the new panel capacity, that work is included in the scope. Utility coordination is sometimes required when the incoming service size needs to change, and we handle that as part of the project rather than leaving it to you to arrange separately.
An electric range requires a dedicated 240-volt circuit, typically a 50-amp circuit with the correct wire gauge run from the panel to the range location. We check panel capacity first, run the circuit, and install the correct outlet or connection point for the range.
Knob-and-tube and aluminum branch-circuit wiring are both common in older housing stock, and both create problems that show up gradually rather than all at once. Loose aluminum connections generate heat under load, and degraded knob-and-tube insulation was not designed to be enclosed in wall insulation. An electrical safety inspection is the clearest way to understand what type of wiring a home has and what condition it is in.
We schedule the work during the hours when the kitchen is not in service and confirm the plan with whoever manages the space. The scope, the circuits affected, and the expected duration are all confirmed before the visit so the kitchen can plan around the shutdown.
We go through the panel condition, the wiring type throughout the property, GFCI and AFCI coverage at required locations, grounding, and any code concerns that have developed since the building was last updated. You get a clear account of what needs attention and what can wait before any repair work is discussed.
Fixtures mounted at significant height may require a ladder taller than a standard step ladder. We assess the access situation when the job is scoped and confirm what is needed before the visit. If the ceiling height is unusual, mention it on the call so the right equipment comes out.
Yes. We schedule electrical work in Windsor, Fort Collins, Timnath, Berthoud, and Johnstown, as well as throughout Loveland and Larimer County.
Call (720) 713-7632 and confirm your address when you call, and we will let you know if anything affects scheduling for your location.
From repairs and troubleshooting to panel upgrades, generator hookups, and the wiring work that keeps a home running through a northern Colorado winter, those are the jobs we take on across Loveland, Windsor, Fort Collins, Timnath, Berthoud, and Johnstown. Call in the morning. Talk it through. Know the options by the end of the call.
Call Wheat Ridge Electrical Company at (720) 713-7632. We are available every day from 5:30 AM to 10:00 PM.
Electrical service reaches these neighboring areas too: Evans, Genesee, Holly Hills, Evergreen.
Everywhere else we go is in our complete service area.
Below is a plain-language look at the electrical services we handle in Loveland and the surrounding area. Each row covers what the job involves, who it fits best, and a practical note to help you decide whether it is the right call. Read through, then call us to talk through the specifics and get a price before anything is scheduled.
| Service | What the Job Involves | Best For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp service upgrades, Panel replacement and load calculation, Subpanel installation, Service entrance and meter upgrades | Older Loveland homes adding EV chargers, electric heating loads, or major appliances that push past the original panel capacity | Panel work is permitted and inspected through Larimer County. We handle the permit side so the job is ready for inspection when the work is done. |
| Lighting Installation | Recessed and LED fixture installation, Security and motion-sensor lighting, Outdoor and landscape lighting wiring, Indoor lighting layout and circuit work | New construction, remodels, or any home adding exterior security lighting or upgrading to LED fixtures | Outdoor fixtures need weatherproof-rated connections and the correct circuit protection. We confirm the rating before installation. |
| Electrical Safety Inspections | Panel condition and wiring type review, GFCI and AFCI coverage check, Grounding and bonding assessment, Written summary of findings | Home buyers, landlords turning over a rental unit, or any homeowner whose panel and wiring have not been reviewed in several years | An inspection before buying a home can surface wiring issues that are not visible during a standard home inspection. |
Call (720) 713-7632 any day from 5:30 AM to 10:00 PM to talk through the job, get the scope confirmed, and find out what it costs before anything is scheduled.
(720) 713-7632